<< Click to Display Table of Contents >> Navigation:  Primary Data Tabs > Field Samples

This section describes the way in which samples should be recorded in EDGE.  For normal groundwater, surface water and leachate samples the EDGE Field Sample tab or Field Sample Form should be used.  This is described in Field Samples - General.  

Where a Discharge Sample is taken the information must be recorded in the Discharge Form.  This is described in Discharge Form

On occasions it is necessary for solid waste samples to be taken for Duty of Care and Waste Acceptance Criteria (WAC) testing.  The recording of samples taken for this purpose are described in the Waste Sampling - Duty of Care Tab section below under Additional Tabs.